An inequality relating fundamental parameters of horizontal slug flow pneumatic conveying

- Orozovic, O., Rajabnia, H., Lavrinec, A., Meylan, M. H., Williams, K., Jones, M. G., Klinzing, G. E.

Individual slugs in a pneumatic conveyor of multiple slugs are likely unstable

- Orozovic, O., Rajabnia, H., Lavrinec, A., Meylan, M. H., Williams, K., Jones, M. G., Klinzing, G. E.

A phenomenological model for the pressure drop applicable across both dilute and dense phase pneumatic conveying

- Orozovic, O., Rajabnia, H., Lavrinec, A., Alkassar, Y., Meylan, M. H., Williams, K., Jones, M. G., Klinzing, G. E.

An assessment of steady-state conditions in single slug horizontal pneumatic conveying

- Lavrinec, A., Orozovic, O., Rajabnia, H., Williams, K., Jones, M. G., Klinzing, G. E.

Inertial measurement unit as a tool within dense phase pneumatic conveying. Investigation into velocity measurement accuracy, pressure and velocity relationships in slug flow

- Lavrinec, A., Orozovic, O., Rajabnia, H., Williams, K., Jones, M. G., Klinzing, G.

Insights into horizontal slug flow pneumatic conveying from layer fraction and slug velocity measurements

- Orozovic, O., Lavrinec, A., Alkassar, Y., Chen, J., Williams, K., Jones, M. G., Klinzing, G. E.

Transport boundaries and prediction of the slug velocity and layer fraction in horizontal slug flow pneumatic conveying

- Orozovic, O., Lavrinec, A., Rajabnia, H., Williams, K., Jones, M. G., Klinzing, G. E.

Velocity and porosity relationships within dense phase pneumatic conveying as studied using coupled CFD-DEM

- Lavrinec, A., Orozovic, O., Rajabnia, H., Williams, K., Jones, M. G., Klinzing, G.

Observations of dense phase pneumatic conveying using an inertial measurement unit

- Lavrinec, A., Orozovic, O., Williams, K., Jones, M. G., Klinzing, G., Clark, W., Wang, Z.

On the kinematics of horizontal slug flow pneumatic conveying and the relationship between slug length, porosity, velocities and stationary layers

- Orozovic, O., Lavrinec, A., Alkassar, Y., Williams, K., Jones, M. G., Klinzing, G.

Understanding wear mechanisms and their implication to service life of pneumatic conveying pipelines

- Cenna, A. A., Biswas, S., Williams, K. C., Jones, M. G.

Application of the principles of gas permeability and stochastic particle agitation to predict the pressure loss in slug flow pneumatic conveying systems

- Lecreps, I., Orozovic, O., Jones, M. G., Sommer, K.

Investigation of energy consumption and wear in bypass pneumatic conveying of alumina

- Chen, B., Cenna, A. A., Williams, K. C., Jones, M. G., Wang, Y.

Methods for in-situ porosity determination of moving porous columns and application to horizontal slug flow pneumatic conveying

- Lecreps, I., Orozovic, O., Eisenmenger, M., Jones, M. G., Sommer, K.

Physical mechanisms involved in slug transport and pipe blockage during horizontal pneumatic conveying

- Lecreps, I., Orozovic, O., Erden, T., Jones, M. G., Sommer, K.

Alumina scale formation and build-up mechanisms pneumatic conveying pipelines

- Cenna, A. A., Williams, K. C., Jones, M. G.

Experimental and numerical research on pressure gradient of a pneumatic conveying pipeline of flyash

- Ma, Aichun, Williams, K. C., Zhou, Jiemin, Jones, M. G.

Analysis of impact energy factors in ductile materials using single particle impact tests on gas gun

- Cenna, A. A., Williams, K. C., Jones, M. G.

Single particle impact tests using gas gun and analysis of high strain-rate impact events in ductile materials

- Cenna, A. A., Page, N. W., Kisi, E., Jones, M. G.

Bulk solids research and its impact on industrial practice

- Jones, M. G.